Palladium(II)‐Catalyzed Synthesis of Isoxazolidines: Using a Catalytic Copper Acetate and Molecular Oxygen as the Cooxidant

An environmentally friendly process is reported for the palladium(II)‐catalyzed cyclofunctionalization of allylic hydroxylamine derivatives using a catalytic amount of copper(II) acetate and molecular oxygen as the cooxidant.     

Synthesis of new bicarbazole-linked triazoles as non-cytotoxic reactive oxygen species (ROS) inhibitors

Abstract

Carbazole analogs 3 and 4 and a new library of bicarbazole-linked triazoles 6–11 were prepared via new synthetic methodology. Metal-catalyzed oxidative coupling reaction was utilized for the synthesis of bicarbazole acetylene 4 and different metals (Zn⁺², Co⁺², Fe⁺³, Ni⁺², Cu⁺², Mn⁺²) as catalyst were screened. Only Fe-catalyzed reaction was found to be excellent and gave homocoupled product 4. Cu-catalyzed 1,3-dipolar cycloaddition was also utilized to install triazole moiety for the synthesis of hybrid molecules 6–11. Based on reported anti-inflammatory activity of carbazole and triazole scaffolds, all compounds were screened for their reactive oxygen species (ROS) inhibitory potential. Results from these studies revealed triazole 9 as most active compound (IC₅₀ value of 7.6?±?0.1?µg/mL on human whole blood and 2.7?±?0.09?µg/mL on isolated neutrophils) using ibuprofen as a standard. Therefore, class described herein can serve as attractive structural element for further studies on ROS inhibition.     

Acid-Promoted Oxygen-Atom Transfer from a Novel Dihydroisoquinoline-Derived Oxaziridine Substituted at Position 1

N-Alkyl-oxaziridines react in the presence of a nucleophile as an oxygenating agent; in the absence of a nucleophile, an isomerization reaction is observed. This study describes the synthesis of two new dihydroisoquinoline oxaziridines and their reactivity in an acid-promoted reaction in the presence and absence of sulfides.     

Efficient Two-Step Synthesis of 11,11′-Dithiobis[1-(2-bromo-2-methylpropionyloxy)undecane], a Conventional Initiator for Grafting Polymer Brushes from Gold Surfaces via ATRP

11,11′-Dithiobis[1-(2-bromo-2-methylpropionyloxy)undecane], a conventional initiator for grafting polymers from gold surfaces, was synthesized in two steps from 11-mercapto-1-undecanol in 88–92% overall yield. Oxidative dimerization of 11-mercapto-1-undecanol with a catalytic amount of sodium iodide and 30% hydrogen peroxide in ethyl acetate proceeded in 96% yield. Esterification with 2-bromoisobutyryl bromide in dichloromethane was clean and almost quantitative (92% yield) with pyridine used as base, whereas triethylamine gave a messy reaction (64% yield). Alternatively, esterification with 2-bromo-2-methyl-propanoic acid in dichloromethane occurred readily under Steglich's conditions with N,N′-dicyclohexylcarbodiimide (DCC) and a catalytic amount of dimethylaminopyridine (DMAP; 88% yield).     

Simple Synthesis of Versatile Coumarin Scaffolds

We describe an approach using ring‐closing metathesis (RCM) to synthesize versatile coumarin derivatives that present appropriate substitutions both at the aromatic and at the α,β‐unsaturated lactone ring. The obtained compounds can be used as molecular scaffolds suitable for further diversifications through a combinatorial approach.     

Annealing of silver nanolayers sputtered on polytetrafluoroethylene

Silver nanolayers sputtered on polytetrafluoroethylene and their changes induced by post‐deposition annealing at 100–300 °C are studied. Changes in surface morphology and roughness are examined by atomic force microscopy and by measurement of electrical sheet resistance by two‐point technique. Chemical composition was determined by X‐ray photoelectron spectroscopy (XPS) and electrokinetic analysis in dependence on the gold layer thickness. The annealing at 300 °C leads to significant rearrangement of the silver layer, and the transition threshold increases to 35 nm. The presence of oxidized structures on silver‐coated samples is observed in XPS spectra and by electrokinetic analysis, too. Annealing of pristine and silver‐coated poly(tetrafluoroethylene) at 300 °C results in significant change of the sample surface morphology and chemistry. There is observed formation of isolated silver islands on the surface, which could be connected with silver melting. Later, the silver agglomeration takes place. Copyright © 2013 John Wiley & Sons, Ltd.     

Tribological behaviors of a novel trilayer nanofilm: the influence of outer chain length and interlayer thickness

Polydopamine (coded as PDA) is reported to be very adhesive and reactive due to the attached functional groups, such as amine and hydroxyl groups. In this work, taking advantage of the condensation between Si–OH of the hydroxylated alkyltrichlorosilane (ATS) and C–OH on PDA surface, ATS molecules with different chain carbon number of 10, 14 and 18 were grafted onto the 3‐aminopropyl triethoxysilane (APTES)‐PDA dual‐layer film, which was composed of PDA outerlayer and APTES underlayer, on Si substrate. Thus, hydrophobic trilayer films coded as APTES‐PDA‐ATS were prepared successfully. In order to reveal the dependence of the tribological behaviors upon the microstructures of the film, tribological experiments were conducted on an atomic force microscope and a ball‐on‐plate tribometer. Experimental results showed that the (micro‐) friction reducing (characterized by a parameter of relative friction coefficient or friction coefficient, RFC or FC) and macro‐wear resisting (characterized by anti‐wear life) behaviors were related with the chain length of outerlayer and the PDA thickness. Specifically, on one hand, as the chain length increases, RFC/FC decreased and macro anti‐wear life lengthened; on the other hand, as PDA gets thicker, RFC increased and the anti‐wear life enhanced. Copyright © 2013 John Wiley & Sons, Ltd.     

Influence of oxygen flow rate on the surface chemistry and morphology of radio frequency (RF) magnetron sputtered zinc oxide thin films

Zinc oxide thin films were deposited, by radio frequency magnetron sputtering, on heated and unheated substrates. The oxygen flow rate was varied during deposition, and its effects on the structural and chemical properties of the films were investigated. The films had oriented c‐axis growth with nano‐crystallite size. Their surfaces manifested columnar microstructure, with a surface roughness that was suppressed by the introduction of oxygen. Chemical analysis showed that deposition under an oxygen atmosphere resulted in substantial reduction of oxygen vacancies, with a corresponding incorporation of chemisorbed species. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface characterization and radical decay studies of oxygen plasma‐treated PMMA films

Polymethylmethacrylate (PMMA) films were modified by RF oxygen plasma with various powers applied for different periods, and the effects of these parameters on the surface properties such as hydrophilicity, surface free energy (SFE), chemistry, and topography were investigated by water contact angle, goniometer, X‐ray photoelectron spectroscopy (XPS), and atomic force microscopy, and the types of the created free radicals and their decay were detected by electron spin resonance spectroscopy (ESR). SFE and contact angle results varied depending on the plasma parameters. Oxygen plasma treatment (100 W–30 min) enhanced the hydrophilicity of PMMA surface as shown by decreasing the water contact angle from 70° to 26°. XPS analysis showed the change in the amounts of the present functionalities as well as formation of new groups as free carbonyl and carbonate groups. The roughness of the surface increased considerably from ~2 nm to ~75 nm after 100 W–30 min oxygen plasma treatment. ESR analysis indicated the introduction of peroxy radicals by oxygen plasma treatment, and the intensity of the radicals increased with increasing the applied power. Significant decrease in radical concentration was observed especially for the samples treated with higher powers when the samples were kept under the atmospheric conditions. As a conclusion, RF plasma, causes changes in the chemical and physical properties of the materials depending on the applied parameters, and can be used for the creation of specific groups or radicals to link or immobilize active molecules onto the surface of a material. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis,characterization, and application of silver nanoparticle‐thiophenol nanocomposite film on the glassy carbon surface

In this study, 4‐thiophenol modified glassy carbon electrode was prepared by the reduction of 4‐diazothiophenol tetrafluoroborate salt. Silver nanoparticles were attached to the thiophenol modified surface to prepare a thiophenol‐silver nanoparticle composite film. 4‐Aminothiopenol molecules were deposited by self‐assembling technique to form multi‐layered nanofilms of TP/SNP/PhNH₂ on glassy carbon substrate. These surfaces were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, X‐ray photoelectron spectroscopy, reflectance‐absorption infrared spectroscopy, and ellipsometry at each multilayer film growth process. Atomic force microscopic images of GC/TP/SNP/PhNH₂ surfaces were also acquired. The characterization methods show that the amine group containing surface permits the subsequent modification by a variety of coupling reactions for the immobilization of more complex systems. An application of the electrode modification for the determination of uric acid with a significantly lower detection limit is described. Copyright © 2013 John Wiley & Sons, Ltd.